70-0299-000
Kit of 22 pins
PN:[70-0299-000]
Open Market/ 16 Weeks
27-0116-026
26-pin connector and backshell (no pins) 2 required - this backshell can accommodate a max of 19 cables without cable dressing
PN:[27-0116-026]
46-0037-000
Insertion Tool
PN:[46-0037-000]
52-0113-000
10-pin cable assy, 14GA wire, 6 ft.
PN:[52-0113-000]
70-0253-001
Conn. Kit (incl. 2 ea. Conn. & vxi backshell + 30 crimp pins)
PN:[70-0253-001]
27-0087-041
41-pin connector and backshell (no pins) (see 52-0102-001 for capacity)
PN:[27-0087-041]
46-0015-000
Extraction Tool
PN:[46-0015-000]
46-0018-002
Crimp Tool, RG179 75 Ohm
PN:[46-0018-002]
46-0021-000
PN:[46-0021-000]
52-0235-000R
Floating Wire Shroud (Does not include connector or pins)
PN:[52-0235-000R]
52-0237-000R
Strain Relief Bracket
PN:[52-0237-000R]
46-0012-001
Crimp Tool
PN:[46-0012-001]
46-0018-001
Crimp Tool, Coax RG316 50 Ohm
PN:[46-0018-001]
52-0515-003
LXI Trigger Bus Interconnect, .3 Meter
PN:[52-0515-003]
27-0088-160
160 Pin Euro DIN, Mating Connector Housing (female)
PN:[27-0088-160]
27-0970-001
PKZ Connector Housing, 53 Position for cables 0.061-0.102 (Phoenix PRC532DX2XANONE)
52-0332-000RNF
16-channel Precision Analog Comparator
52-0332-000RNF-ISO17025
ISO17025 for 52-0332-000RNF
52-0332-000RNF-Z540
ANZI-Z540 CALIBRATION for 52-0332-000RNF
46-0093-000
Tool, Hand Crimp Positioner, Positronics 9502-4-0-0
PN:[46-0093-000]
52-0064-000R-ISO17025
ISO17025 for 52-0064-000R
PN:[52-0064-000R-ISO17025]
52-0886-100R
SP6T 18GHz non-terminated (for EX72CC)
PN:[52-0886-100R]
53-0515-030
3 Meter Long BOB cable for the EMX4250/51
53-0515-200
20 Meter Long BOB cable for the EMX4250/51
70-0017-002R
Enclosure Kit, Double-wide
52-0109-000R
100 crimp pins
PN:[52-0109-000R]
52-0109-001R
500-pin wheel
70-0035-005
Bare B/B w/PGA Hole Pattern, Double (includes Enclosure)
PN:[70-0035-005]
70-0293-000
Connector Kit (includes 21-pin connector & backshell plus 22 pins)
PN:[70-0293-000]
53-0515-010
1 Meter Long BOB cable for the EMX4250/51
70-0017-001R
Enclosure Kit, Single-wide
52-0127-360
Single Coax Cable with RF pin, 3 ft.
PN:[52-0127-360]
52-0733-000R-ISO17025
ISO17025 for 52-0733-000R
PN:[52-0733-000R-ISO17025]
52-0733-003R
4-channel Programmable Resistor, with Option 7, Resistance values from 0 to 16, 383,000 Ohms
52-0886-010R
SPDT 18GHz non-latching subassembly (for EX72CC)
PN:[52-0886-010R]
56-0739-120R
(Optional) POWER SUPPLY, AC/DC, DESKTOP, 24V, 120W, PSE (Japan)
PN:[56-0739-120R]
52-0487-000NF
20MSa/s 14 Bit Digitizer/IF Receiver
52-0576-000NF
4-channel, High-performance Serial Interface, 4MD RAM
PN:[52-0576-000NF]
52-0593-000R
8-channel, 16-bit DAC/Waveform Generator
52-0594-000R
16-channel, 16-bit DAC/Waveform Generator
52-0615-000R
6.5 Digit DMM with FIFO
PN:[52-0615-000R]
52-0355-000NF
50 MSa/s Arbitrary Waveform Generator w/Power Down Feature
PN:[52-0355-000NF]
52-0733-000R
4-channel Programmable Resistor
PN:[52-0733-000R]
70-0691-000R-Z540
ANZI-Z540 CALIBRATION for 70-0691-000R
PN:[70-0691-000R-Z540]
70-0674-000R
EMX-7513 32DI/32DO, Source/Sink, 60V max, Isolated Static I/O
PN:[70-0674-000R]
70-0691-000R
16 Channel High Performance Digitizer, Voltage inputs 420V Max
PN:[70-0691-000R]
52-0733-001R
4-channel Programmable Resistor, with Option 5, Resistance values from 0 to 163,830 Ohms
70-0626-000R-ISO17025
ISO17025 for 70-0626-000R
PN:[70-0626-000R-ISO17025]
890-851-01
Switzerland (IEC 320-C13 Receptacle to SW1-10P Plug)
70-0626-000R
16-Channel Isolated Thermocouple / Voltage Measurement (table top, no rack ears)
PN:[70-0626-000R]
