1325.5028.02

Resolution bandwidth up to 80 MHz, 20 MHz and 50 MHz additionally option R&SFSWP-B1 required, for R&SFSWP50 (hardware option)

PN:[FSWP-B8]

Open Market/ 22 Weeks

1325.3848.02

Support for harmonic mixers, includes LO/IF ports for external mixers for R&SFSWP for x-corr option FSWP-B64 required (hardware option)

PN:[FSWP-B21]

Open Market/ 22 Weeks

1420.6579.02

Ramp sweep, frequency option (R&SSMAB-B103/B106/ B112/B120) required, retrofittable in R&S service with UCS (hardware option)

PN:[SMAB-B28]

Open Market/ 22 Weeks

1331.8019.26

Upgradekit for R&SESW-B21 option for R&SESW26 LO/IF connections for external mixers retrofittable in Rohde&Schwarz service (hardware option)

PN:[ESW-U21]

Open Market/ 22 Weeks

1319.5136.32

Additional ports 13 to 18, R&SZN-Z154 and R&SZNZ154-B22 required (hardware option) (integration ex factory or in service)

PN:[ZNZ154-B32]

Open Market/ 22 Weeks

1319.4969.24

Additional test ports 7-12, 4 VNA ports, for R&SZN-Z84 Matrix Base Unit (hardware option) (integration ex factory or in service)

PN:[ZN-Z84-B24]

Open Market/ 22 Weeks

1319.4969.22

Additional test ports 7-12, 2 VNA ports, for R&SZN-Z84 Matrix Base Unit (hardware option) (integration ex factory or in service)

PN:[ZN-Z84-B22]

Open Market/ 22 Weeks

1313.6318.27

LO/IF connections for external mixers for retrofit into R&SFSW26 with R&SFSW-B2000 retrofittable in Rohde&Schwarz Service (hardware option)

PN:[FSW-U21]

Open Market/ 22 Weeks

1413.1200.02

Baseband generator with realtime coder and ARB (64 MSamples), R&SSMW-B13/B13T required, retrofittable in Rohde & Schwarz service (hardware option)

PN:[SMW-B10]

Open Market/ 22 Weeks

1416.1553.02

Frequency extension 12.75GHz, CW only (frequency option R&SSGS-B106 required, retrofittable only in Rohde & Schwarz service with UCS; hardware option)

PN:[SGS-B112]

Open Market/ 22 Weeks

1207.8457.02

Audio analyzer/generator, for new units and units delivered after September 2011, retrofittable in R&S service, CMW module H400B (hardware option)

PN:[CMW-B400B]

Open Market/ 7 Weeks

1329.7102.02

1GHz bandwidth upgrade for R&SRTO2002/4 incl. calibration (for models 1329.7002.xx) retrofittable in R&S service only (hardware option)

PN:[RTO-B201]

Open Market/ 22 Weeks

1420.9190.02

Super ultra high output power 31.8/40 GHz, u. high power option (R&SSMAB-K36) required, not installable post factory (hardware option)

PN:[SMAB-B36S]

Open Market/ 16 Weeks

1345.3108.60

RF Preamplifier, 30 dB 100 kHz to 50 GHz for R&SFSMP50AF option R&SFSMP-B1 required (hardware option)

PN:[FSMP-B24]

Open Market/ 22 Weeks

1420.6504.02

Rear Connectors 3/6 GHz, N, frequency option (R&SSMAB-B103/B106) required, retrofittable in R&S service with UCS (hardware option)

PN:[SMAB-B80]

Open Market/ 22 Weeks

1346.4950.14

Enhanced phase noise and lower noise level for FSVA3013, low end frequency range extended to 2 Hz, not installable post factory (Hardware option)

PN:[FSV3-B710]

Open Market/ 22 Weeks

1346.4950.05

Enhanced phase noise and lower noise level for FSVA3004, low end frequency range extended to 2 Hz, not installable post factory (Hardware option)

PN:[FSV3-B710]

Open Market/ 22 Weeks

1346.4950.08

Enhanced phase noise and lower noise level for FSVA3007, low end frequency range extended to 2 Hz, not installable post factory (Hardware option)

PN:[FSV3-B710]

Open Market/ 22 Weeks

1346.4950.31

Enhanced phase noise and lower noise level for FSVA3030, low end frequency range extended to 2 Hz, not installable post factory (Hardware option)

PN:[FSV3-B710]

Open Market/ 22 Weeks

1346.4950.44

Enhanced phase noise and lower noise level for FSVA3044 low end frequency range extended to 2 Hz, not installable post factory (Hardware option)

PN:[FSV3-B710]

Open Market/ 22 Weeks

1316.3555.17

Solid state drive for R&SESRP with CPU board FMR9 and Windows 10 2016 with installed instrument firmware, replaces standard hard disk (hardware option)

PN:[ESRP-B18]

Open Market/ 22 Weeks

1319.5742.14

Changes port 4 to 7/16(f), upper frequency limited to 7.5GHz !, for calibration unit R&SZN-Z51 Var74 (hardware option)

PN:[ZNZ51-B460]

Open Market/ 22 Weeks

1319.5759.13

Changes port 3 to 7/16(m), upper frequency limited to 7.5GHz !, for calibration unit R&SZN-Z51 Var74 (hardware option)

PN:[ZNZ51-B361]

Open Market/ 22 Weeks

1319.5742.13

Changes port 3 to 7/16(f), upper frequency limited to 7.5GHz !, for calibration unit R&SZN-Z51 Var74 (hardware option)

PN:[ZNZ51-B360]

Open Market/ 22 Weeks

1319.5759.14

Changes port 4 to 7/16(m), upper frequency limited to 7.5GHz !, for calibration unit R&SZN-Z51 Var74 (hardware option)

PN:[ZNZ51-B461]

Open Market/ 22 Weeks

1329.0243.02

DC power supply for 12/24V supply voltage, input operating range 10V to 28V; for R&SFSV, FSVA, ESR, ESRP (hardware option)

PN:[FSV-B30]

Open Market/ 22 Weeks

1329.0589.10

Solid state drive for R&SFSV40-N with FMR11 and Win 10 including analyzer firmware, for exchange against standard hard drive (hardware option)

PN:[FSVN-B18]

Open Market/ 22 Weeks

1329.0589.06

Solid state drive for R&SFSV40-N with FMR11 and Win 7 including analyzer firmware, for exchange against standard hard drive (hardware option)

PN:[FSVN-B18]

Open Market/ 22 Weeks

1418.2928.02

Frequency extension 40GHz, with vector modulation (frequency option R&SSGU-B120V req., retrofittable only in Rohde & Schwarz service with UCS; hardware option)

PN:[SGU-B140V]

Open Market/ 22 Weeks

1325.3719.09

Cross correlation for phase noise analyzer R&SFSWP8 from 1MHz to 8 GHz Low phase noise, includes R&SFSWP-B4, (hardware option)

PN:[FSWP-B61]

Open Market/ 22 Weeks

1321.4304.19

Solid state drive for R&SFPS, including analyzer firmware, for exchange against standard hard drive, also for upgrades to Win10 LTSC 2019 (hardware option)

PN:[FPS-B18]

Open Market/ 22 Weeks

1345.3108.29

RF Preamplifier, 30 dB 100 kHz to 26.5 GHz for R&SFSMP26AF option R&SFSMP-B1 required (hardware option)

PN:[FSMP-B24]

Open Market/ 22 Weeks

1304.0427.02

Second hard disk for R&SFPL1000, premounted on PC-board, with DVI monitor connector, including analyzer Firmware, for exchange against standard hard drive (hardware option)

PN:[FPL1-B19]

Open Market/ 22 Weeks

1335.8988.02

Mixed signal, max. 400 MHz, 2.5GSa/s, 16 channels, 100MSa per channel, for R&SRTM3002 and R&SRTM3004 oscilloscopes, (hardware option)

PN:[RTM-B1]

Open Market/ 22 Weeks

1319.5759.11

Changes port 1 to 7/16(m), upper frequency limited to 7.5GHz !, for calibration unit R&SZN-Z51 Var72/74 (hardware option)

PN:[ZNZ51-B161]

Open Market/ 22 Weeks

1319.5742.11

Changes port 1 to 7/16(f), upper frequency limited to 7.5GHz !, for calibration unit R&SZN-Z51 Var72/74 (hardware option)

PN:[ZNZ51-B160]

Open Market/ 22 Weeks

1319.5742.12

Changes port 2 to 7/16(f), upper frequency limited to 7.5GHz !, for calibration unit R&SZN-Z51 Var72/74 (hardware option)

PN:[ZNZ51-B260]

Open Market/ 22 Weeks

1319.5759.12

Changes port 2 to 7/16(m), upper frequency limited to 7.5GHz !, for calibration unit R&SZN-Z51 Var72/74 (hardware option)

PN:[ZNZ51-B261]

Open Market/ 22 Weeks

1338.2380.02

Upgrade for R&SESR with FMR11 to Windows 10 IoT Enterprise LTSC 2019 includes SSD and Windows 10 license (retrofittable in service) (hardware option)

PN:[ESR-U3]

Open Market/ 22 Weeks

1416.1576.02

Frequency extension 12.75GHz, with vector modulation (frequency option R&SSGS-B106V req., retrofittable only in Rohde & Schwarz service with UCS; hardware option)

PN:[SGS-B112V]

Open Market/ 22 Weeks

1335.7823.03

Mixed signal, max. 400 MHz, up to 5GSa/s, 16 channels, 200MSa per channel, for R&SRTA4000 oscilloscopes, (hardware option with unregistered license)

PN:[RTA-B1]

Open Market/ 22 Weeks

1422.5740.02

Ultra High Output Power for R&SSMBB-B101, SMBB-B103, SMBB-B106 R&SSMBB-K31 required not installable post factory (hardware option)

PN:[SMBB-B32]

Open Market/ 22 Weeks

1334.3860.03

Additional removable SSD 512B (including firmware) for R&SZNB with IPS14 and Windows 10 Operating System (hardware option) for ZNB models 1334.3330.xx

PN:[ZNB-B19]

Open Market/ 22 Weeks

1330.2000.02

Housing option to mount EVSG1000 on a tripod and to put a monopod with antenna dipole on top of the EVSG1000 Hardware option (factory fitted)

PN:[EVSG1-B4]

Open Market/ 22 Weeks

1313.4296.02

Extension to 500MHz signal analysis bandwidth, includes microwave preselector bypass, excludes R&SFSW-B160/U160/B320, retrofittable in R&S service (hardware option)

PN:[FSW-B500]

Open Market/ 22 Weeks

1331.6400.16

Real-time spectrum analyzer 800 MHz, includes signal analysis bandwidth 2 GHz, for R&SFSW26/43/50/67/85 retrofittable in R&S service (hardware option)

PN:[FSW-B800R]

Open Market/ 22 Weeks

1332.4675.02

2nd internal LO source, for R&SZNA (4 ports) external access up to 26.5 GHz requires option R&SZNA-B8 in addition (Hardware option)

PN:[ZNA-B5]

Open Market/ 22 Weeks

1319.5136.42

Additional ports 19 to 24, R&SZN-Z154 and R&SZNZ154-B22 and -B32 required (hardware option) (integration ex factory or in service)

PN:[ZNZ154-B42]

Open Market/ 22 Weeks

1313.0832.13

RF preamplifier, 30dB, 100kHz to 8/13GHz, for R&SFSW8 und R&SFSW13, retrofit in Rohde & Schwarz service (hardware option)

PN:[FSW-B24]

Open Market/ 22 Weeks

1304.8311.03

GPIB interface for R&SRTO 1316.1000.xx and R&SRTO2000 1329.7002.xx (hardware option, can not be combined with RTO-B1 MSO option)

PN:[RTO-B10]

Open Market/ 22 Weeks