National Instruments Corporation NI Single-Board RIO Power Cable Kit
- Power cable for NI Single-Board RIO
- Serial/CAN IDC to D-SUB cable
- 50-pin I/O ribbon cable for multifunction NI Single-Board RIO
- Standoffs for mounting RIO Mezzanine Cards (RMCs)
These accessories are used for the following NI Single-Board RIO models: sbRIO-9605, sbRIO-9606, sbRIO-9623, sbRIO-9626, sbRIO-9633, and sbRIO-9636.
The power cable has a Molex mating connector with 12 in. pigtail leads.
The serial/controller area network (CAN) cable is a 10-position IDC female to 9-position D-SUB male cable for use on RS232 serial, RS485 serial, and CAN ports on NI Single-Board RIO.
The 50-pin I/O ribbon cable is designed for use with the sbRIO-9623, sbRIO-9626, sbRIO-9633, and sbRIO-9636 models with 50-pin IDC connectors for multifunction I/O. The cable is 12 in. long and features strain relief and pull-out tabs.
The 9.65 mm standoffs are used when mating NI Single-Board RIO models featuring an RMC connector to an RMC using the Samtec SEAM-40-03.0-S-06-2-A-K-TR or equivalent height mating connector. These standoffs are also used with the NI 9694 digital I/O breakout RMC.