1338.7582.02
Upgrade of internal signal source for additive phase noise meas. FSWP-B64 to 0.1dB level steps Option FSWP-B64 needed (hardware option)
PN:[FSWP-U64]
Open Market/ 22 Weeks
1414.1033.02
Rear panel connectors for RF path B (20 GHz), R&SSMW-B2020 and R&SSMW-B81/B83 required retrofittable only in factory (hardware option)
PN:[SMW-B84]
Open Market/ 22 Weeks
1438.8150.02
Deeper chassis, prerequisite for R&SSMW-B2012, R&SSMW-B2031, R&SSMW-B2044, R&SSMW-B2044N, not installable post factory (hardware option)
PN:[SMW-B94L]
Open Market/ 22 Weeks
1440.9609.02
Frequency range: 100 kHz to 44 GHz, I/Q modulation bandwidth max. 550 MHz (in RF), min. pulse width limited, not installable post factory (hardware option)
PN:[SMM-B1044N]
Open Market/ 16 Weeks
1420.6527.02
Rear Connectors 50/67 GHz, PC1.85, frequency option (R&SSMAB-B150(N)/B167(N)) required, retrofittable in R&S service with UCS (hardware option)
PN:[SMAB-B82]
Open Market/ 22 Weeks
1514.7778.02
Filter Panel for DST200; 1 x D-Sub 9 - pin Socket Adapter and lowpass feedthrough Filter; 2 x FSMA fiber optic Interface; including EMI gaskets (Hardware Option)
PN:[DST-B101]
Open Market/ 22 Weeks
1514.7784.02
Interface Panel for DST200; 2 x N female RF connector; 2 x N protective cap; 2 x internal RF cable (SMA, male); including EMI gaskets (Hardware Option)
PN:[DST-B102]
Open Market/ 22 Weeks
1325.5028.26
Resolution bandwidth up to 80 MHz, 20 MHz and 50 MHz additionally, for R&SFSWP8 and R&SFSWP26, option R&SFSWP-B1 required (hardware option)
PN:[FSWP-B8]
Open Market/ 22 Weeks
1419.8207.02
Connector Extension Unit Front panel N-connector for RF path Rear panel BNC-Connectors for IQ IN, REF/LO and USER2 (not installable post factory) (hardware option)
PN:[SGT-B88]
Open Market/ 22 Weeks
1319.5871.12
Option for calibration unit R&SZN-Z51 Var. 72/74 changes port 2 to connector 4.3-10, female, 100 kHz - 8.5 GHz (hardware option)
PN:[ZNZ51-B240]
Open Market/ 22 Weeks
1319.5871.13
Option for calibration unit R&SZN-Z51 Var. 72/74 changes port 3 to connector 4.3-10, female, 100 kHz - 8.5 GHz (hardware option)
PN:[ZNZ51-B340]
Open Market/ 22 Weeks
1319.5871.11
Option for calibration unit R&SZN-Z51 Var. 72/74 changes port 1 to connector 4.3-10, female, 100 kHz - 8.5 GHz (hardware option)
PN:[ZNZ51-B140]
Open Market/ 22 Weeks
1319.5871.14
Optioni for calibration unit R&SZN-Z51 Var. 72/74 changes port 4 to connector 4.3-10, female, 100 kHz - 8.5 GHz (hardware option)
PN:[ZNZ51-B440]
Open Market/ 22 Weeks
1313.2464.02
Resolution bandwidth up to 80 MHz 20MHz, 40 MHz, 50 MHz and 80 MHz additionally; not installable postfactory (hardware option) For R&SFSW43/50/67/85
PN:[FSW-B8]
Open Market/ 22 Weeks
1321.3750.04
LI-Ion battery pack, requires options R&SFSV-B30, B34 (for FSV/A and ESRP also B1) for R&SFSV, FSVA, ESR, ESRP (hardware option)
PN:[FSV-B32]
Open Market/ 22 Weeks
1428.7500.02
Low phase noise for RF path B, R&SSMW-B709 in path A required, only installable together with frequency option R&SSMW-B20xx (hardware option)
PN:[SMW-B719]
Open Market/ 22 Weeks
1517.5047.02
Recording, streaming and export of multiplexed I/Q data streams by IQR (without hardware for streaming) Requirements: Source or destination instrument has to support this feature (software license)
PN:[IQR-K105]
Open Market/ 22 Weeks
1419.8007.02
Differential analog I/Q outputs, R&SSGT-K510 required Existing SGTs with SN < 102000 cannot be retrofitted with the required hardware for analog IQ outputs. (software license)
PN:[SGT-K16]
Open Market/ 22 Weeks
1357.3650.02
Second internal Local Oscillator 4-port ZNA3026/32/44/54 external access up to 26.5 GHz requires option R&SZNA-B8 in addition (Hardware option)
PN:[ZNA3-B5]
Open Market/ 22 Weeks
1331.7106.06
Real-time spectrum analyzer, 512 MHz including 200 MHz IF filter excludes R&SFSW-B/U160/B/U320/B/U1200 (retrofit in service) (hardware Option)
PN:[FSW-B512R]
Open Market/ 22 Weeks
1332.6184.51
Source reference signal access for port 1 before the source step attenuator, for R&SZNA26 requires R&SZNA26-B16/-B21 (Hardware option, Upgrade option)
PN:[ZNA26-U161]
Open Market/ 22 Weeks
1332.6190.51
Source reference signal access for port 1 before the source step attenuator, for R&SZNA43 requires R&SZNA43-B16/-B21 (Hardware option, Upgrade option)
PN:[ZNA43-U161]
Open Market/ 22 Weeks
1332.6426.21
Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps, for R&SZNA26, Upgrade-option, retrofit in Rohde & Schwarz service center (Hardware option)
PN:[ZNA26-U21]
Open Market/ 22 Weeks
1516.8659.02
Positioner for calibration antennas TS-RANT3 and TS-RANT18 RF cable SMA-N, 6dB attenuator SMA-SMA Coaxial right angle adapter SMA-N (hardware option)
PN:[DST-B120]
Open Market/ 22 Weeks
1801.6770.02
GPIB interface for R&SRTO6, retrofittable, cannot be combined with R&SRTO6-B1 MSO or R&SRTO6-B1E Digital Extension Port (hardware option)
PN:[RTO6-B10]
Open Market/ 22 Weeks
1420.8020.02
Ultra low phase noise, frequency option (R&SSMAB-B106/-B112 -B120/-B131/-B140/-B150/-B167) required, not installable post factory (hardware option)
PN:[SMAB-B711]
Open Market/ 22 Weeks
1335.8988.03
Mixed signal, max. 400 MHz, 2.5GSa/s, 16 channels, 100MSa per channel, for R&SRTM3002 and R&SRTM3004 oscilloscopes, (hardware option and unregistered license)
PN:[RTM-B1]
Open Market/ 22 Weeks
1332.6426.22
Source step attenuator for port 2, mechanical, 70 dB in 10 dB steps, for R&SZNA26, Upgrade-option, retrofit in Rohde & Schwarz service center (Hardware option)
PN:[ZNA26-U22]
Open Market/ 22 Weeks
1332.6461.32
Receiver step attenuator for port 2, mechanical, 35 dB in 5 dB steps, for R&SZNA26, Upgrade-option, retrofit in Rohde & Schwarz service center (Hardware option)
PN:[ZNA26-U32]
Open Market/ 22 Weeks
1332.6432.21
Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps, for R&SZNA43, Upgrade-option, retrofit in Rohde & Schwarz service center (Hardware Option)
PN:[ZNA43-U21]
Open Market/ 22 Weeks
1428.7100.02
Ultra low phase noise for RF path B, R&SSMW-B711 in path A required, only installable together with frequency option R&SSMW-B20xx (hardware option)
PN:[SMW-B721]
Open Market/ 22 Weeks
1332.6432.22
Source step attenuator for port 2, mechanical, 70 dB in 10 dB steps, for R&SZNA43, Upgrade-option, retrofit in Rohde & Schwarz service center (Hardware option)
PN:[ZNA43-U22]
Open Market/ 22 Weeks
1332.6461.31
Receiver step attenuator for port 1, mechanical, 35 dB in 5 dB steps, for R&SZNA26, Upgrade-option, retrofit in Rohde & Schwarz service center (Hardware option)
PN:[ZNA26-U31]
Open Market/ 22 Weeks
1332.6478.32
Receiver step attenuator for port 2, mechanical, 35 dB in 5 dB steps, for R&SZNA43, Upgrade-option, retrofit in Rohde & Schwarz service center (Hardware option)
PN:[ZNA43-U32]
Open Market/ 22 Weeks
1420.7700.02
High output power 50 GHz, frequency option (R&SSMAB-B150/B150N and 3HU option (R&SSMAB-B93) required, not installable post factory (hardware option)
PN:[SMAB-B37]
Open Market/ 22 Weeks
1420.7900.02
High output power 67 GHz, frequency option (R&SSMAB-B167/B167N) and 3HU option (R&SSMAB-B39) required, not installable post factory (hardware option)
PN:[SMAB-B39]
Open Market/ 22 Weeks
1419.7900.02
2nd ARB for envelope signal, R&SSGT-K16 required Existing SGTs with SN < 102000 cannot be retrofitted with the required hardware for analog IQ outputs. (software license)
PN:[SGT-K543]
Open Market/ 22 Weeks
1331.7106.04
Extension to 512 MHz signal analysis bandwidth including 200 MHz IF filter excludes R&SFSW-B/U160/B/U320/B/U1200 (retrofit in service) (hardware Option)
PN:[FSW-B512]
Open Market/ 22 Weeks
1321.6320.04
Upgrade from 80 MHz to 512 MHz signal analysis bandwidth excludes R&SFSW-B160/B160R/U160/ B320/U320 (retrofittable in service) (hardware option)
PN:[FSW-U512]
Open Market/ 22 Weeks
1332.6478.31
Receiver step attenuator for port 1, mechanical, 35 dB in 5 dB steps, for R&SZNA43, Upgrade-option, retrofit in Rohde & Schwarz service center (Hardware option)
PN:[ZNA43-U31]
Open Market/ 22 Weeks
1518.4515.02
Linear polarized communication antenna for R&SDST200, 700 MHz to 6 GHz, SMA connector, incl. RF cable (SMA) Dimensions: 185 mm x 95 mm x 6 mm (hardware option)
PN:[DST-B270]
Open Market/ 22 Weeks
1516.8407.02
Filterpanel for R&S DST200, Feedthrough filter for AC power supply, 100V to 240V, 50Hz to 60Hz, max. 50W, Including EMI gaskets (Hardware.Opt.)
PN:[DST-B104]
Open Market/ 22 Weeks
1518.5328.02
Test antenna kit for R&S DST200, antenna base plate 152mm x 152mm RF connectors: 1x SMA inside, 1x N outside RF Absorber (hardware option)
PN:[DST-B231]
Open Market/ 22 Weeks
1424.8901.02
3rd and 4th R&SNRP sensor connector (C,D), Two 8-pole connectors for R&SNRP sensors on rear side of the R&SNRX base unit (hardware option)
PN:[NRX-B4]
Open Market/ 22 Weeks
1420.7200.02
Ultra high output power 3/6 GHz, frequency option (R&SSMAB-B103/B106) and high power option (R&SSMAB-K31) required, not installable post factory (hardware option)
PN:[SMAB-B32]
Open Market/ 22 Weeks
1332.4630.23
Source step attenuator for port 3, mechanical, 70 dB in 10 dB steps for R&SZNA26 (B-option ex factory only, ZNAxx-Uxx for retrofit) (Hardware option)
PN:[ZNA26-B23]
Open Market/ 22 Weeks
1332.4700.31
Receiver step attenuator for port 1, mechanical, 35 dB in 5 dB steps for R&SZNA26 (B-option ex factory only, ZNAxx-Uxx for retrofit) (Hardware option)
PN:[ZNA26-B31]
Open Market/ 22 Weeks
1332.4630.21
Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps for R&SZNA26 (B-option ex factory only, ZNAxx-Uxx for retrofit) (Hardware option)
PN:[ZNA26-B21]
Open Market/ 22 Weeks
1332.4700.33
Receiver step attenuator for port 3, mechanical, 35 dB in 5 dB steps for R&SZNA26 (B-option ex factory only, ZNAxx-Uxx for retrofit) (Hardware option)
PN:[ZNA26-B33]
Open Market/ 22 Weeks
1332.4700.34
Receiver step attenuator for port 4, mechanical, 35 dB in 5 dB steps for R&SZNA26 (B-option ex factory only, ZNAxx-Uxx for retrofit) (Hardware option)
PN:[ZNA26-B34]
Open Market/ 22 Weeks
