187252-0R25 - National Instruments Corporation RC68-68 RIBBON CABLE, 68 D-TYPE TO 68..

The NI RC68-68 ribbon cable connects any NI X Series or M Series data acquisition (DAQ) device to a 68-pin accessory. This cable is terminated with a 68-pin VHDCI male connector for the DAQ device and an SCSI-II female connector for the connector block. The RC68-68 also connects latching NI E Series PCMCIA cards (NI DAQCard-6062E and DAQCard-6024E) to 68-pin accessories via a 68-pin female connector. You can use two RC68-68 cables together in adjacent PCMCIA slots or adjacent connectors on the two-connector M Series devices.

CAUTION: NI products typically must be operated with shielded cables and accessories to ensure compliance with Electromagnetic Compatibility (EMC) requirements. To determine if shielded cables or accessories are required for your NI product, refer to the EMC specifications in the products user guide or manual. If shielded cables or accessories are required for EMC compliance, do not use unshielded cables or accessories unless they are installed in a shielded enclosure with properly designed and shielded input/output ports and they are connected to the NI product using a shielded cable. If unshielded cables or accessories are not properly installed and shielded, the EMC specifications for the product are no longer guaranteed.