National Instruments Corporation POWER SUPPLY AND CABLE FOR USB-6509, 12 VDC, U.S. (120 V)
- Optional power supply for use with the NI USB-6509
- Region-specific power cable included
- Use for additional sourcing current when driving multiple loads on digital output lines
- May be used as replacement power supply for NI CompactDAQ and some NI GPIB, ENET, and DAQPad devices
The NI USB-9219 is a 4-channel universal C Series module designed for multipurpose testing. With the USB-9219, you can measure several signals from sensors such as strain gages, RTDs, thermocouples, load cells, and other powered sensors. The channels are individually selectable, so you can perform a different measurement type on each of the four channels. Measurement ranges differ for each type of measurement and include up to 60 V for voltage and 25 mA for current. Refer to the manual for detailed specifications and ranges.
With 250 Vrms of channel-to-channel isolation, the USB-9219 protects not only the surrounding modules, chassis, and connected computer system but also the other channels within the same module. In addition to increased safety, channel-to-channel isolation eliminates problems associated with ground loops.
The USB-9219 uses 6-position spring terminal connectors in each channel for direct signal connectivity. You can purchase additional connectors to reduce signal connection time for multiple test units. In addition to extra connectors, a strain relief kit is available to secure the signal wires.
You can use the NI 9219 module included in the USB-9219 kit in an NI CompactRIO chassis or an NI CompactDAQ USB chassis for higher-channel-count systems.
Strain relief backshells for signal wire security and high-voltage protection (qty 4): NI 9972
Extra connectors for 6-position connector modules (qty 10): NI 9973