Product specs for National Instruments Corporation 782083-01

The NI 9751 Direct Injector Driver Module for NI CompactRIO provides a CompactRIO module for driving typical common-rail diesel solenoid injectors, gasoline direct injectors, and some piezo actuated injectors. The kit includes LabVIEW FPGA and LabVIEW Real-Time VIs to control all driver channels and a 10-pin screw terminal block. Each Direct Injector Driver Module driver channel is individually controlled for timing and duration, but channel operation may not overlap. This module is also capable of driving Siemens common-rail diesel injectors with piezo actuators (or similar). The module cannot control piezo and solenoid actuator types simultaneously. When configured for piezo mode, channel 3 is not available and must have its terminals shorted together. An inductor pack for use with piezo injectors is sold separately.

You can use NI Powertrain Control C Series modules with NI cRIO-911x, NI cRIO-907x, and NI R Series expansion systems under the following conditions.
-Leave one empty chassis slot between NI Powertrain Control and other NI modules.
-Maintain an ambient system operating temperature of 0 to 45 C.
-Typical NI module specifications may not apply when used in a system with NI Powertrain Control modules.
-Warranted specifications are guaranteed for all NI modules except thermocouple modules when used in a system with NI Powertrain Control modules.
-The NI 9214 is recommended for thermocouple measurements in CompactRIO systems using NI Powertrain Control modules.
-NI Scan Interface mode, autodetection, and ID mode do not work when using NI Powertrain Control modules.