Product Description:
National Instruments Corporation 781320-02 NI 6583 (32 SE and 16 mLVDS, 200 MHz SDR, 200 Mbps DDR)
- 200 MHz maximum clock rate (300 Mbit/s data rate in double data rate mode)
- 35 (32 + 3 PFI) single-ended channels with selectable voltages from 1.2-3.3V with 10 bit resolution
- 19 (16 + 3 PFI) LVDS or mLVDS bidirectional channels
- Per-pin direction control on all channels with 10 ns state change time
- Simultaneous operation of single ended and differential channels
- The NI 6583 requires an NI FlexRIO FPGA module. Check Resources tab for compatible modules
- Configure Complete PXI System
- View Data Sheet
View Support Resources
The NI 6583 is a mixed-logic 200 MHz digital adapter module for NI FlexRIO field-programmable gate array (FPGA) modules. This adapter module features 32-single ended (SE) and 16 low-voltage differential signaling (LVDS or mLVDS) channels capable of up to 200 MHz clock rates with up to 300 Mbit/s data rates using double data rates (DDR) on a 150 MHz sample clock (sampling on both the rising and falling edges of the clock).
Single-Ended
The 32 single-ended channels feature selectable voltages of 1.2, 1.8, 2.5, and 3.3 V. These are individually controlled, hardware-timed bidirectional channels and are thus ideal for communication protocols such as SPI and I2C.
LVDS / mLVDS
The 16 LVDS / mLVDS channels are also individually controlled, hardware-timed bidirectional channels capable of up to 300 Mbit/s data rates.
Note : Two separate part numbers exist for the LVDS or the mLVDS option.
You can use NI LabVIEW FPGA Module software with a programmable onboard FPGA to emulate custom or standard digital protocols, perform onboard analysis such as real-time hardware compare, or even embed existing VHDL IP.
More National Instruments Corporation savings
|
| Stock photo |