Product Description:
National Instruments Corporation 781320-01 NI 6583 (32 SE and 16 LVDS, 200 MHz SDR, 300 Mbps DDR)
- 200 MHz maximum clock rate (300 Mbit/s data rate in double data rate mode)
- 35 (32 + 3 PFI) single-ended channels with selectable voltages from 1.2-3.3V with 10 bit resolution
- 19 (16 + 3 PFI) LVDS or mLVDS bidirectional channels
- Per-pin direction control on all channels with 10 ns state change time
- Simultaneous operation of single ended and differential channels
- The NI 6583 requires an NI FlexRIO FPGA module. Check Resources tab for compatible modules
- Configure Complete PXI System
- View Data Sheet
View Support Resources
The NI 9157 MXI-Express RIO chassis is a cabled reconfigurable I/O (RIO) target for high-performance applications. A high-bandwidth, cabled link based on a x1 PCI Express bus, the MXI-Express interface is transparent to software applications and drivers. You can connect the NI 9157 directly to the multicore CompactRIO or NI industrial controller. You can also use ExpressCard, PXI/PXI Express to MXI-Express adapters, or PCI Express to MXI-Express adapters to connect the NI 9157 to industrial PCs or PXI embedded controllers. You can daisy chain up to six MXI-Express RIO chassis in a single chain and connect up to eight chains to a single controller, making MXI-Express RIO an ideal choice for high-channel-count applications.
The NI 9157 includes a user-programmable Xilinx Virtex-5 FPGA core, giving you high processing power and capacity and the ability to design custom hardware using NI LabVIEW FPGA Module software. The FPGA software provides low-level hardware access to the hot-swappable C Series I/O modules, so you can create unprecedented timing, triggering, control, and synchronization schemes for industrial, hardware-in-the-loop, and real-time test applications.
More National Instruments Corporation savings
|
| Stock photo |