Product specs for National Instruments Corporation 779296-01

National Instruments Corporation 779296-01

Product Description:

National Instruments Corporation 779296-01 PXI-6225 (80 AI, 24 DIO)

  • Consider the NI PXIe-6345/6355/6365/6375 modules for faster sampling and higher channel count
  • Two 16-bit analog outputs (833 kS/s)
  • 24 digital I/O; two 32-bit counters; digital triggering
  • Correlated DIO (8 clocked lines, 1 MHz)
  • Includes NI-DAQmx, SignalExpress LE data-logging software, and other measurement services
  • NIST-traceable calibration and more than 70 signal conditioning options
  • Configure Complete PXI System
  • View Data Sheet
    • View Support Resources
The National Instruments PCI-6225 is a low-cost multifunction M Series data acquisition (DAQ) board optimized for cost-sensitive applications. For optimal performance using the NI PCI-6255, NI recommends using the SHC68-68-EPM cable for connector 0 and the SHC68-68 cable for connector 1. The SCC-68 or other NI signal conditioning accessories are not compatible with connector 1. Also consider the PCI-6255 for 80-measurement channels at 1.25 MS/s single-channel sampling rate.

Low-cost M Series devices incorporate advanced features such as the NI-STC 2 system controller, NI-PGIA 2 programmable amplifier, and NI-MCal calibration technology to increase performance and accuracy. To learn more about M Series technologies, device specifications, and information on recommended cables and accessories, please refer to the data sheet and specifications.

Driver Software
M Series devices work with multiple operating systems using three driver software options including NI-DAQmx, NI-DAQmx Base, and the Measurement Hardware DDK. Browse the information in the Resources tab to learn more about driver software or download a driver. M Series devices are not compatible with the Traditional NI-DAQ (Legacy) driver.

Application Software
Every M Series data acquisition device includes a copy of NI LabVIEW SignalExpress so you can quickly acquire, analyze, and present data without programming. In addition to LabVIEW SignalExpress, M Series data acquisition devices are compatible with the following versions (or later) of NI application software LabVIEW 7.x, LabWindows/CVI 7.x, or Measurement Studio 7.x; or LabVIEW with the LabVIEW Real-Time Module 7.1. M Series data acquisition devices are also compatible with Visual Studio .NET, C/C++, and Visual Basic 6.







More National Instruments Corporation savings

Measure signals from a variety of sensors.
Develop automatic test systems with the NI PXI advantage.
Prototype and deploy embedded systems.
National Instruments Corporation 779296-01
Stock photo