Product specs for National Instruments Corporation 779109-01

National Instruments Corporation 779109-01

Product Description:

National Instruments Corporation 779109-01 PCI-6281 (16 AI, 24 DIO, 2 AO)

  • Two 16-bit analog outputs (2.8 MS/s); 24 digital I/O; two 32-bit, 80 MHz counters
  • Programmable 40 kHz lowpass filters
  • NI-MCal calibration technology for increased measurement accuracy
  • Correlated DIO (8 clocked lines, 10 MHz); analog and digital triggering
  • NI-DAQmx driver software and NI LabVIEW SignalExpress LE interactive data-logging software
  • View Data Sheet
    • View Support Resources
The National Instruments M Series high-accuracy multifunction data acquisition (DAQ) devices are optimized for 18-bit analog input accuracy. This resolution is equivalent to 5 digits for DC measurements. To ensure accuracy, the NI-PGIA 2 amplifier technology is optimized for high linearity and fast settling to 18 bits, and programmable lowpass filters reject high-frequency noise and prevent aliasing.

High-accuracy M Series devices feature programmable offsets and references on the analog output channels to obtain maximum 16-bit resolution on any custom signal. High-accuracy M Series multifunction DAQ devices are ideal for applications including device test and characterization, and for sensor and signal measurements requiring instrument-class accuracy. To learn more about M Series technologies, device specifications, and information on recommended cables and accessories, please refer to the data sheet and specifications.

Driver Software
M Series devices work with multiple operating systems using three driver software options including NI-DAQmx, NI-DAQmx Base, and the Measurement Hardware DDK. Browse the information in the Resources tab to learn more about driver software or download a driver. M Series devices are not compatible with the Traditional NI-DAQ (Legacy) driver.

Application Software
With NI LabVIEW, you can create custom data acquisition applications with the ease of graphical programming and power of more than 500 analysis functions and advanced programming tools. LabVIEW Full and Professional Development Systems include LabVIEW SignalExpress for interactive data logging. M Series data acquisition devices are compatible with the following versions (or later) of NI application software LabVIEW 7.x, LabWindows/CVI 7.x, or Measurement Studio 7.x; LabVIEW SignalExpress 1.x; or LabVIEW with the LabVIEW Real-Time Module 7.1. M Series data acquisition devices are also compatible with Visual Studio .NET, C/C++, and Visual Basic 6.







More National Instruments Corporation savings

Measure signals from a variety of sensors.
Develop automatic test systems with the NI PXI advantage.
Prototype and deploy embedded systems.
National Instruments Corporation 779109-01
Stock photo