Product specs for Tektronix 2792

Tektronix 2792

Product Description:

Tektronix 2792 10 kHz to 26.5 GHz Spectrum Analyzers

The Tektronix 2792 spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Tektronix 2792. The CRT displays received signal strength (y-axis) against frequency ( x-axis).

Some applications for Tektronix 2792 Spectrum Analyzers include Site Monitoring: Verify that the frequency and signal strength of your transmitter is accurate. Interference: Before a system is installed you use a Tektronix 2792 spectrum analyzer to verify that the frequencies (you plan to use) are not occupied or if the presence of a very strong signal will interfere with your new setup. Interference can be created by a number of different situations. Other tests that utilize the Tektronix 2792 spectrum analyzer features include antenna isolation, co-channel interference, adjacent channel power, occupied bandwidth, intermodulation, microwave or satellite antenna alignment, and characterization of components.

Feature:
Minimum Frequency: 10kHz
Maximum Frequency: 26.5GHz
Resolution bandwidth: 1Hz

Features

100 Hz to 325 GHz Frequency Coverage

Continuous-Resolution Frequency Tuning

Up to 90 dB View-able Dynamic Range

Built-in Frequency Counters Provide Frequency Determination to Within

0.0000001% (1 + 1e+9/day ref.)

Sensitivities to -110 dBm

Built-in Intelligence for Signal Processing/Marker Functions

Push Button Noise-Normalization Functions

Macro Capability with Non-volatile Memory

Optional Switch-Selectable 50/75 ohm Impedances

Non-volatile Memory for up to Nine Waveforms and Ten Front-panel

Settings

GPIB Programmability with Tektronix Codes and Formats

Applications

Manufacturing ATE

Avionics

Broadcasting

CATV

Cellular Radio

Design and Engineering

Nuclear Physics

Radio Astronomy

Satellite Communications

Terr Manufacturing ATE
Avionics
Broadcasting
CATV
Cellular Radio
Design and Engineering
Nuclear Phyics
Two-way radio

More Tektronix savings

Using Raspberry Pi to Control Your Oscilloscope
Webinar: Getting Most Out of Touchscreen Scope
Webinar: 5 Series B
5 Series B MSO - Performance for today and tomorrow
5 Series B MSO - Intuitive Controls
5 Series B MSO - Insightful Measurements
5 Series B MSO - Multi-Channel Spectrum Analysis
5 Series B MSO - Technical Overview
3 New Features with the 3 Series MDO Firmware Update
Measuring the Control Loop Response of a Power Supply
6 Series B MSO Mixed Signal Oscilloscopes
6 Series B MSO Mixed Signal Oscillosope Upgrades
Tektronix/Keithley 2019-2020 Test & Measurement Solutions
3 Series MDO and 4 Series MSO Fact Sheet
3 Series MDO vs MDO3000
RSA7100A - Don't Fail on the Range
Reduce Design Risk with High-Performance COTS EW/Radar Receivers
What You Can't See CAN Hurt You
Test Solutions for Military & Government Programs
Real-Time Optimization for Size, Weight and Power (SWAP)
Delightful Analysis.
Advanced Power Measurement Capability
RSA500 Series
Watch us drop our Spectrum Analyzer from the top of a building!
6 Instruments.1 Scope. Infinite Versatility.
Keithley
Tektronix 2792
Stock photo