Product specs for Tektronix 2782

Tektronix 2782

Product Description:

Tektronix 2782 100 Hz-33 GHz Spectrum Analyzers

The Tektronix 2782 spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Tektronix 2782. The CRT displays received signal strength (y-axis) against frequency ( x-axis).

Some applications for Tektronix 2782 Spectrum Analyzers include Site Monitoring: Verify that the frequency and signal strength of your transmitter is accurate. Interference: Before a system is installed you use a Tektronix 2782 spectrum analyzer to verify that the frequencies (you plan to use) are not occupied or if the presence of a very strong signal will interfere with your new setup. Interference can be created by a number of different situations. Other tests that utilize the Tektronix 2782 spectrum analyzer features include antenna isolation, co-channel interference, adjacent channel power, occupied bandwidth, intermodulation, microwave or satellite antenna alignment, and characterization of components.

Feature:
Minimum Frequency: 100Hz
Maximum Frequency: 40GHz
Resolution bandwidth: 3Hz

External Waveguide Mixer Support to 325GHz with Frequency Calibration to 1.2THz
Mixed input decoupling
Exclusive bandwidth mode
Built-in automation
Macro downloading
Soft key Menu

More Tektronix savings

Using Raspberry Pi to Control Your Oscilloscope
Webinar: Getting Most Out of Touchscreen Scope
Webinar: 5 Series B
5 Series B MSO - Performance for today and tomorrow
5 Series B MSO - Intuitive Controls
5 Series B MSO - Insightful Measurements
5 Series B MSO - Multi-Channel Spectrum Analysis
5 Series B MSO - Technical Overview
3 New Features with the 3 Series MDO Firmware Update
Measuring the Control Loop Response of a Power Supply
6 Series B MSO Mixed Signal Oscilloscopes
6 Series B MSO Mixed Signal Oscillosope Upgrades
Tektronix/Keithley 2019-2020 Test & Measurement Solutions
3 Series MDO and 4 Series MSO Fact Sheet
3 Series MDO vs MDO3000
RSA7100A - Don't Fail on the Range
Reduce Design Risk with High-Performance COTS EW/Radar Receivers
What You Can't See CAN Hurt You
Test Solutions for Military & Government Programs
Real-Time Optimization for Size, Weight and Power (SWAP)
Delightful Analysis.
Advanced Power Measurement Capability
RSA500 Series
Watch us drop our Spectrum Analyzer from the top of a building!
6 Instruments.1 Scope. Infinite Versatility.
Keithley
Tektronix 2782
Stock photo