Product Description:
Agilent Technologies, Inc. 3566A PC Spectrum/Network Analyzer
The Agilent Technologies, Inc. 3566A spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Agilent Technologies, Inc. 3566A. The CRT displays received signal strength (y-axis) against frequency ( x-axis).
Some applications for Agilent Technologies, Inc. 3566A Spectrum Analyzers include Site Monitoring: Verify that the frequency and signal strength of your transmitter is accurate. Interference: Before a system is installed you use a Agilent Technologies, Inc. 3566A spectrum analyzer to verify that the frequencies (you plan to use) are not occupied or if the presence of a very strong signal will interfere with your new setup. Interference can be created by a number of different situations. Other tests that utilize the Agilent Technologies, Inc. 3566A spectrum analyzer features include antenna isolation, co-channel interference, adjacent channel power, occupied bandwidth, intermodulation, microwave or satellite antenna alignment, and characterization of components.
Feature:Minimum Frequency: 0.000064Hz
Maximum Frequency: 12.8kHz
A rich measurement set makes the HP 3566A excellent for mechanical test, signal characterization, and control systems,
rotating machinery analysis and production test where signals are below 12.8 kHz. This PC based dynamic signal analyzer is
configurable from 8 to 48 channels, and uses modular HP 3565S hardware to achieve high system performance. Since the HP
3566A is a Microsoft Windows« application, measurement results are easily shared with other Windows applications, such as
spreadsheets, word processors, and the HP 35639A Data Viewer.
The HP 3566A includes a source for stimulating circuits or systems. For fast measurement processing, a powerful hardware
signal processor module converts time data to frequency domain data using the latest FFT technology. The included HP
35653C source module provides internal calibration signals and sine, noise, and pulse test stimulus.
An optional HP 35659A, SCSI interface module adds high speed transient 12.8kHz Frequency anal BW
MS Windows Application
Voltage Transducer
IEPE Transducer
Pow/Lin Spec
RPM Spectrum Map
Auto/Cross Correlation
Instantaneous Time
Filtered Orbit
Prob/Cumu Den Func
Histogram
Frequency Response
|
| Stock photo |