Rohde & Schwarz URV5-Z2 10 V insertion unit, 50 Ohm, 9 kHz - 3 GHz, 200 µV - 10 V, N-male/female, 1.3 m cable
The voltage sensors of the URV5-Z series are indispensable tools in RF and microwave laboratories, test departments and service. They cover a frequency range from 9 kHz to 3 GHz and thus close the gap between low-frequency voltage measurements and microwave power measurements. Consequently they may be used for:
- High-impedance DC and AC voltage measurements in noncoaxial circuits
- Level measurements in 50 O lines
- Terminated power measurements
- Voltage sensors are the right tools for everyday use. They permit the measurement of voltages from 200 µV to 1000 V and of powers from 1 nW (-60 dBm) up to 200 W (+53 dBm).
RF Probe URV5-Z7
A versatile tool for measuring high-frequency voltages. Thanks to its low input capacitance of 2.5 pF ideal for practically no-load measurements on non-coaxial circuits up to about 500 MHz (with accessories up to 1 GHz). Measurement range with plug-on dividers 1000 V (input capacitance 0.5 pF).
Accessry Set URV-Z6
Plug-on divider 20 dB and 40 dB for extending the measurement range and reducing the input capacitance to100 V/1 pF or 1000 V/0.5 pF.BNC adapter for level measurements on coaxial 50 W lines (see also Insertion Units URV5-Z2, -Z4).
Adapters
URV-Z50 (50 W), URV-Z3 (75 W)With integrated termination for power measurements on matched sources.
DC Probe URV5-Z1
Due to its low input capacitance ideal for DC voltage measurements on high-frequency modules.
Insertion Units URV5-Z2 (50 W), URV5-Z4 (50 W and 75 W)
Insertion units are used for non-interrupting level measurements between source and load and for power measurements with wide dynamic range. They are made up of a short, reflection-free and low-loss line section with voltage tap and rectifier in the middle of the line. With a well-matched load, the transmitted power P can be calculated for the measured voltage Vrms and the characteristic impedance Z0 according to the formula