National Instruments Corporation NI cDAQ-9138 NI CompactDAQ, Celeron 1.06 GHz Controller 8-slot Chassis, Real-Time
- 1.06 GHz dual-core Intel Celeron processor, 32 GB nonvolatile storage, 2 GB DDR3 800 MHz RAM
- More than 50 hot-swappable I/O modules with integrated signal conditioning
- 4 general-purpose 32-bit counter/timers built into chassis (access through digital module)
- Run up to 7 hardware-timed analog I/O, digital I/O, or counter/timer operations simultaneously
- 4 USB Hi-Speed, 2 Gigabit Ethernet, 2 serial, and 1 MXI-Express port for connectivity
- Measure in minutes with NI-DAQmx software and automatic code generation using the DAQ Assistant
- Configure Complete NI CompactDAQ System
- View Data Sheet View Support Resources
The high-performance NI cDAQ-9138 eight-slot controller includes Intel Celeron dual-core processing and 32 GB nonvolatile storage for advanced data-logging and embedded monitoring applications. The processing power of the cDAQ-9138 makes it well suited to perform the online processing tasks required by complex applications such as image detection and machine life-cycle prognostics. You have the option to use a Microsoft Windows Embedded Standard 7 (WES7) or LabVIEW Real-Time OS. Choose WES7 on the cDAQ-9138 to take advantage of the extensive Windows ecosystem of software and display capabilities made possible by LabVIEW software. LabVIEW Real-Time is recommended for long-term reliability and headless operation. The high-performance cDAQ-9138 also offers a wide array of standard connectivity and expansion options, including USB, Ethernet, serial, MXI-Express, and VGA display output. Check the product and driver documentation for OS-specific expansion capabilities.
Combine the cDAQ-9138 with up to eight NI C Series I/O modules for a custom analog input, analog output, digital I/O, counter/timer, and CAN measurement and logging system. Modules are available for a variety of sensor measurements including thermocouples, RTDs, strain gages, load and pressure transducers, torque cells, accelerometers, flow meters, and microphones. NI CompactDAQ systems combine sensor measurements with voltage, current, and digital signals to create custom, mixed-measurement systems within a single system. The cDAQ-9138 has four 32-bit general-purpose counter/timers built in. You can access these counters through an installed, hardware-timed digital module such as the NI 9401 or NI 9402 for applications that involve quadrature encoders, PWM, event counting, pulse train generation, and period or frequency measurement.
NI-DAQmx driver software is shipped with every chassis and includes the following:
-API for LabVIEW, ANSI C/C++, C#, and Visual Basic .NET
-DAQ Assistant code generation for NI LabVIEW, LabWindows/CVI, and Measurement Studio
-Example programs for all supported languages
-NI Measurement & Automation Explorer (MAX) for system configuration and test
The cDAQ-9138 WES7 option is shipped preinstalled with the latest LabVIEW evaluation version and NI-DAQmx.
The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.