National Instruments Corporation Reference Clock T Connector
- 20 Hz to 14 GHz or 26.5 GHz
- 765 MHz of bandwidth
- -166 dBm/Hz average noise floor at 1 GHz
- -129 dBc/Hz phase noise at 10 kHz offset (800 MHz center frequency)
- User-programmable with LabVIEW FPGA
- Configure Complete PXI System
- View Data Sheet
The NI PXIe-6124 S Series multifunction data acquisition (DAQ) module offers simultaneous sampling at 4 MS/s per channel, 16 bits of resolution, and a PXI Express interface for dedicated bandwidth from module to controller. The module features high speed and resolution that suit a variety of applications such as:
- Highly transient signal acquisition
- Ballistics and impact testing
- High-energy physics
- Ultrasonic and sonar testing
With NI LabVIEW software, you can create custom data acquisition applications with the ease of graphical programming and power of more than 500 analysis functions and advanced programming tools. Every copy of LabVIEW also includes LabVIEW SignalExpress interactive data-logging software.
NI-DAQmx Driver Software
NI-DAQmx driver software goes far beyond a basic data acquisition driver to deliver increased productivity and performance in data acquisition and control application development. NI-DAQmx controls every aspect of your data acquisition system, from configuration, to programming, to low-level operating system and device control. Quickly gather real-world data with measurement-ready virtual channels and the DAQ Assistant. Build your applications with measurement-specific VIs, functions, and data types. Reliably make your measurements faster with optimized DMA data transfer and single-point I/O.
The NI PXIe-6124 is RoHS compliant. For certification information on NI hardware, visit ni.com/certification.
For additional information, visit the Resources tab.