National Instruments Corporation NI Vision Builder for Automated Inspection Run-Time License, Download
- Run machine vision applications configured with Vision Builder for Automated Inspection
- Includes NI Vision Acquisition Software to acquire from GigE Vision, IEEE 1394, USB, other cameras
- Data Sheet
The NI USB-8476s module is a 1-port LIN interface for connecting PCs to LIN networks and devices. It offers software-selectable, master/slave termination, so you can monitor, log, and test at all points of a LIN network. The USB-8476s includes NI-CAN driver software, which provides a powerful, frame-based API for rapid application development.
Advanced Synchronization
The USB-8476s features a 3-pin COMBICON synchronization connector for synchronizing the internal hardware timebase with other devices, such as USB CAN and LIN interfaces, as well as NI data acquisition, motion, and vision devices, with 1 MHz, 10 MHz, or 20 MHz clocks. Synchronization eliminates clock drift between devices; you can trigger between devices for correlating CAN data with data from other devices.
All-in-One Design
The convenient all-in-one design features an integrated 2 m USB cable and built-in transceiver, requiring no extra cables or accessories to get applications running quickly. The USB-8476s controller is USB powered. The LIN physical layer is powered from VBat (required for the LIN bus) and features standard electrical isolation up to 500 VDC (withstand, 2 s max) channel-to-bus.
Hardware Timestamping
With hardware timestamping, you can log messages with microsecond-accurate timestamps for reconstructing network events. The USB-8476s interface uses a 9-pin male D-SUB (DB9) connector to interface to LIN.
Advanced Functionality
The USB-8476s features the Atmel ATA6620 LIN transceiver, providing advanced functionality and protection including the following for LIN networks:
Sleep and silent modes
Transient voltage protection (-150 to 100 V)
High LIN bus DC voltage (-40 to 60 V)
Thermal protection
Click on the first link in the 'Resources' tab for more information and a direct download link to the NI-CAN driver software.