National Instruments Corporation 779641-04 External Power Supply for SCC-68 Accessory, EURO (240 VAC)
- I/O connector block for use with X, M, and E Series DAQ devices (NI-DAQmx only)
- Powered by the data acquisition device connected in most cases (see manual)
- 68 screw terminals for easy I/O connections
- 4 expansion slots for analog input and digital I/O SCC signal conditioning modules
- Built-in cold-junction compensation for low-cost thermocouple measurements
- General-purpose breadboard area for custom circuitry
- View Data Sheet | Specifications
The NI USB-6525 is a bus-powered USB device with eight normally open solid-state relay outputs featuring 60 VDC/30 Vrms switching voltage and 500 mA per channel maximum switching current. The solid-state relay outputs are ideal for controlling pumps, valves, motors, and various other industrial actuators. The USB-6525 also features eight 60 VDC channel-to-channel isolated digital inputs to read from industrial digital sensors. You can use one of the digital input channels as a 5 kHz, 32-bit counter for counting digital pulses and measuring frequency and pulse widths.
Isolated channels break ground loops and offer protection from noise and spikes on external signals. For added ease of use and reliability, the USB-6525 features built-in screw terminals and strain relief.
Industrial Feature Set
NI industrial digital I/O devices offer a set of high-reliability features designed to automate even the most demanding applications. Programmable power-up states provide safe operation when connected to pumps, valves, motors, and relays. Digital I/O watchdog timers detect computer or application crashes and ensure safe recovery. Change detection triggers your application and performs a read operation after a digital event with minimal processor usage. Programmable input filters eliminate glitches/spikes and remove noise.
Driver Software
The USB-6525 works with NI-DAQmx driver software, which features an easy-to-use and intuitive interface for programming. The device, which is compatible with NI LabVIEW, NI LabWindows/CVI, ANSI C/C++, C#, Visual Basic .NET, and Visual Basic 6.0, works with standard Windows OSs.
The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.