National Instruments Corporation NI PCI-5421, 100 MS/s Arbitrary Waveform Generator, 16-bit, 8 MB
- 12 Vpp into 50 load
- 100 MS/s sampling rate, 400 MS/s with interpolation
- 91 dBc close-in SFDR and -62 dBc THD at 10 MHz
- Graphical waveform creation and editing software
- 8, 32, or 256 MB of onboard memory
- 16-bit LVDS digital pattern output for 32 MB and higher memory options
- Data Sheet View Support Resources
Mounting Compact FieldPoint Systems
NI offers four mounting options for Compact FieldPoint. There are two panel mount options the NI cFP-PM-H horizontal mount, with the holes at the sides of the backplane, and the cFP-PM-V vertical mount, with the holes at the top and bottom of the backplane. The backplanes are normally shipped with the cFP-PM-H. One kit is needed for either the NI cFP-BP-4 or the cFP-BP-8. You can also easily mount either the 4 or 8-slot backplanes in a standard 19 in. rack with the cFP-RM-8. The rack-mount bracket features captive screws for mounting the backplanes, and cutouts for running grounding cables to the backplane. The fourth mounting option is to mount Compact FieldPoint on a DIN rail using the DIN-rail mounting clip. The cFP-BP-8 requires two DIN-rail mounting clips, while the cFP-BP-4 requires only one.
Mounting Stand-Alone NI cFP-21xx Real-Time Controllers
National Instruments offers options for mounting Compact FieldPoint controllers apart from a cFP-BP-x backplane, in applications requiring redundant controllers without redundant I/O. Mounting options include panel or DIN-rail mounting.