Marvin Test Solutions Inc. MT3045-BOP Hellfire Missile Simulator with a Break-out Panel

MT3045-BOP - Marvin Test Solutions Inc. Hellfire Missile Simulator with a..

Warranty: 1 Year
Shipping: FOB Origin
Ships in: 60 Days
Country of Origin: United States
SIN: 334515
Part No:
GSA Schedule: GS-35F-0311R Exp.:02 Feb. 2025

U.S. Government, Military
and Contractors only
Price: Do you qualify for GSA Schedule?

Description

Marvin Test Solutions Inc. Hellfire Missile Simulator with a Break-out Panel

Full simulation of Hellfire and Hellfire II missiles (AGM-114A-K,M)
Partial simulation of Longbow Hellfire Missile (AGM-114L)
Simulates missile in tracking and non-tracking modes (LOAL & LOBL)
Selectable missile types (Hellfire, Hellfire II, Longbow, training, tactical, AWM-101A)
Provides indication of critical rail signals
Can be used as a missile simulator, stray-voltage monitor, and as launcher/system tester
Can provide real-time monitoring of all rail signals and advanced simulation when connected to a host computer via an RS-422 link

Full simulation of Hellfire and Hellfire II missiles (AGM-114A-K,M)
Partial simulation of Longbow Hellfire Missile (AGM-114L)
Simulates missile in tracking and non-tracking modes (LOAL & LOBL)
Selectable missile types (Hellfire, Hellfire II, Longbow, training, tactical, AWM-101A)
Provides indication of critical rail signals
Can be used as a missile simulator, stray-voltage monitor, and as launcher/system tester
Can provide real-time monitoring of all rail signals and advanced simulation when connected to a host computer via an RS-422 link

Description

The MT3045 is an Advanced Hellfire Missile Simulator (HMS) for the Hellfire Modular Missile System. The MT3045 is capable of simulating Hellfire missiles, tracking critical signals, and displaying status to the operator.

The MT3045 can further be used as part of a Hellfire test system and is fully programmable to generate all signals associated with all type of missiles, and perform measurements on signals generated by the M299 Longbow Launcher.

In stand-alone mode, the MT3045 is connected to any of the M299 rails, and draws its operating power from the launcher. In this mode, the MT3045 simulates the selected missile (Hellfire, Hellfire II, or Longbow) and the operator can select the missile type (training or tactical) and launch mode: LOAL or LOBL (missile tracking or not). Additionally, the MT3045 can simulate other equipment such as AN/AWM-101, instrumentation, and reprogramming (to allow reload of LEA firmware). The MT3045 includes a laser code interface and supports both PRF and PIM (Alternate) codes. Seven indicators provide power, squibs, and laser code status.

Features

The sophisticated design of the MT3045 allows for advanced missile simulation and test using a serial link to a host computer such as SPORT or other laptop computers. When slaved to a host computer, the microprocessor-based MT3045 allows full control and selection of missile types and modes, as well as a variety of other missile parameters (including the ability to simulate missile faults such as BIT failures, Code Accept Failure, etc.).

Additionally, the MT3045 can provide the host computer with accurate measurements for all signals generated by the M299 launcher including momentary signals and stray voltage. Using state-of-theart software, host computers can communicate with one or two MT3045 simulators, providing for a simultaneous two-rail test and simulation of the M299 or XM310 launchers.

System And Launcher Testing Built-In-Test

The HMS includes an extensive built-in test (BIT) that verifies the internal circuitry and provides status to the host computer. Additionally, the host computer can initiate a wide range of commanded BIT tests to verify the operational status of the MT3045.

Rugged Construction

The rugged construction of the HMS provides for field operation anywhere in the world. The MT3045 can operate in adverse weather conditions providing the ultimate tool for field simulation and test.

Applications

Missile system integration
Missile simulation
Flight-line pre-load tester (No Voltage Tester)

Breakout Panel Version

For those applications that require in-depth testing, simulation, and troubleshooting capabilities, the MT3045-BOP provides the ideal solution by combining the capabilities of the MT3045 with a Break Out Box. The MT3045-BOP provides direct access to rail signals and allows the user to either monitor these signals using external measurement devices, inject signals to simulate faults or special operating modes, and break signals between the MT3045 and the rail.



















Additional Details

GSA
  • Available NEW for official U.S. Government & Authorized Contractor purchase only
  • This is available to Authorized User Groups and Agencies for delivery to CONUS, Alaska, Hawaii and Puerto Rico. Commercial and non-US entities are not authorized to purchase from GSA MSA contracts and may not reference GSA prices.
Type: GSA Schedule
Calibration: New
DUNS: #08-643-8152
Tax ID: 94-3310442
CAGE code: 1RPN6
DODAAC: Q90079
Small business credit applies for this item.

Get quote

U.S. Government, Military and Contractors only
Toll free: 888-665-2765
Outside US: +1 650-624-0525
*First name:
*Last name:
*E-mail:
*Phone:
*Country: Not on this list?
*Quantity: