Product Description:
Anritsu MS2661C Spectrum Analyzer (9kHz to 3 GHz)
The Anritsu MS2661C spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Anritsu MS2661C. The CRT displays received signal strength (y-axis) against frequency ( x-axis).
Some applications for Anritsu MS2661C Spectrum Analyzers include Site Monitoring: Verify that the frequency and signal strength of your transmitter is accurate. Interference: Before a system is installed you use a Anritsu MS2661C spectrum analyzer to verify that the frequencies (you plan to use) are not occupied or if the presence of a very strong signal will interfere with your new setup. Interference can be created by a number of different situations. Other tests that utilize the Anritsu MS2661C spectrum analyzer features include antenna isolation, co-channel interference, adjacent channel power, occupied bandwidth, intermodulation, microwave or satellite antenna alignment, and characterization of components.
The MS2661C Portable Spectrum Analyzer is for signal analysis of radio and other equipment related to improving frequency usage efficiency, higher modulation, and digitalization. This is a synthesized spectrum analyzer covering a wide frequency range from 9 kHz to 3 GHz. It has superior basic performance such as high C/N ratio, low distortion, and high frequency/level accuracies and is easy to operate. It has a "Measure" function for evaluation of radio equipment (frequency counter, C/N, adjacent channel power, occupied frequency bandwidth, burst average power, and template decision function), and which enables the two-screen display and FM demodulation waveform display. The large selection of options means that a wider range of applications can be handled at reasonable cost.
Features
- Range: 9 kHz to 3 GHz
- Power: -100 dBm
- Resolution: 1 Hz
Supplied with:- Power cord, 2.6 m
- Fuse, 5 A (2 ea)
- MS2650B, MS2660B/C series operation manual
- Front cover (3/4MW4U)
Performance Characteristics of the MS2661C
| Form Factor |
Benchtop |
| Minimum Frequency |
9 kHz |
| Maximum Frequency |
3 GHz |
| Zero Span |
No |
| Demodulation |
FM |
| Probe Power |
No |
| Noise Source Driver |
No |
Programmability/Connectivity of the MS2661C
| User Interface |
Proprietary
|
MS2661C Compliance
| CE Compliance |
Not on file
|
| UL Compliance |
Not compliant
|
MS2661C Power Requirements
| Input Power |
USA (110V/60Hz) |
MS2661C Physical Dimensions
- Width: 320 mm(12.59 in)
- Height: 177 mm(6.96 in)
- Length: 351 mm(13.81 in)
- Weight: 10.8 kg(23.8 lb)
More Anritsu savings
Used, refurbished at