Product specs for Agilent E4402B

Product Description:

Agilent E4402B ESA-E 9 kHz-3.0 GHz Spectrum Analyzer

The Agilent E4402B spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Agilent E4402B. The CRT displays received signal strength (y-axis) against frequency ( x-axis).

Some applications for Agilent E4402B Spectrum Analyzers include Site Monitoring: Verify that the frequency and signal strength of your transmitter is accurate. Interference: Before a system is installed you use a Agilent E4402B spectrum analyzer to verify that the frequencies (you plan to use) are not occupied or if the presence of a very strong signal will interfere with your new setup. Interference can be created by a number of different situations. Other tests that utilize the Agilent E4402B spectrum analyzer features include antenna isolation, co-channel interference, adjacent channel power, occupied bandwidth, intermodulation, microwave or satellite antenna alignment, and characterization of components.

Measurement: 28 /sec
Remote Measurement: 19 /sec
Warm-up Time: 5 Min
Measurmt Range: -151 to +30dBm
Large,High-resolution colorVGA
Max.Sensitivity: -151 dBm
+/-1 dB Overall Amplitude Accuracy

Performance Characteristics of the E4402B

Form Factor	Benchtop
Minimum Frequency	9 kHz
Maximum Frequency	3 GHz
Frequency Accuracy	0.000000037 %
Zero Span	Yes
Minimum Sweep Time	5 ms
Minimum Resolution Bandwidth	10 Hz
Maximum Resolution Bandwidth	5 MHz
Resolution Bandwidth Steps	1/3/10
Minimum Single-Side-Band Noise	90 dBc/Hz
Maximum Single-Side-Band Noise	90 dBc/Hz
Maximum Dynamic Range	90 dB
Probe Power	No
Noise Source Driver	No