Product specs for Agilent 35670A

Product Description:

Agilent 35670A Two or four Channel Dyn. Signal Analyzer

The Agilent 35670A spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Agilent 35670A. The CRT displays received signal strength (y-axis) against frequency ( x-axis).

Some applications for Agilent 35670A Spectrum Analyzers include Site Monitoring: Verify that the frequency and signal strength of your transmitter is accurate. Interference: Before a system is installed you use a Agilent 35670A spectrum analyzer to verify that the frequencies (you plan to use) are not occupied or if the presence of a very strong signal will interfere with your new setup. Interference can be created by a number of different situations. Other tests that utilize the Agilent 35670A spectrum analyzer features include antenna isolation, co-channel interference, adjacent channel power, occupied bandwidth, intermodulation, microwave or satellite antenna alignment, and characterization of components.

Performance Characteristics of the 35670A

Form Factor	Benchtop
Type	Analyzer
Input Impedance	1 MOhm
Minimum Frequency	0 Hz
Maximum Frequency	102.4 kHz
Frequency Accuracy	0.003 %
Zero Span	No
Minimum Span	195.3 mHz
Maximum Span	102.4 kHz
Minimum Resolution Bandwidth	122 uHz
Maximum Resolution Bandwidth	25.6 kHz
Maximum Safe AC Input	27 dBm
Maximum Dynamic Range	90 dB
Trigger Source	Internal
Trigger Modes	Burst,Delay,Periodic,PostTriggers,PreTrigger
Probe Power	No
Noise Source Driver	No