Instruments For Industry TCCX2200 Amplifier,TWT: 2200Watts,220MHz (Stand alone)
Specifications for TCCX 2200 :
Power and frequency
2200 Watts saturated power
1800 Watts minimum linear power (at 1 dB compression)
Instantaneous frequency range: 0.01 to 220 MHz
Performance characteristics
Small signal gain: 65 dB
Gain control range: > 40 dB
Bandpass flatness: ± 2.0 dB (at 1 dB compression)
Maximum harmonics: -20 dBc
Spurious signals: < -60 dBc
Input VSWR: 2.0 : 1
Input Impedance: 50 ohms
Output Impedance: 50 ohms
RF rise and fall time: 100 ns
Front panel display and controls
Gain control dial with infinite resolution adjustment
Meters with selection knob to monitor tube voltages and currents
Overload, filament on, auto-limit, no air flow, wait, and panel open indicators
Lighted push-buttons for on, off, operate, overload reset, and standby functions
Toggle switches for external leveling control
Leveling control (ALC)
Can take in an external leveling signal ranging from 1 to 5 Volts through a BNC connection
Amplifier monitoring and protection
Primary and secondary overloads
Unconditionally stable against load mismatches
Can tolerate up to 100% of reflected RF power; i.e., will operate into any impedance from a short circuit to an open circuit
Auto-limit tube protection circuitry that limits the drive through the final stages to a safe level
Will automatically go into a wait mode when air circulation or tube filament voltages are lost
Exterior panel interlocks, that when open, will put the amplifier into standby mode and discharge all capacitors
Cooling
Completely air cooled with IFI's unique Quiet Cool® design
RF signal connectors
Input: Type BNC located on front panel; 8 dBm maximum input
Output: Type N located on front panel
Electrical power requirements
208 or 380 Volts AC (customer must specify at time of order; other options available)
50/60 Hz line frequency
Three phase
21 kVA power consumption
Dimensions and weight
Height: 72 in. (183 cm)
Width: 33 in. (84 cm)
Depth: 36 in. (91 cm)
Weight: 650 lbs. (295 kg)
Environmental requirements
Operating temperature: 32° to 113° F (0° to 45° C)
Relative humidity (without condensation): 95%
Maximum altitude: 10,000 ft. (3,048 m)
--------------------------------------------------------------------------------
Available Options
--------------------------------------------------------------------------------
RF power indication
Forward and reverse digital power indication via directional coupler
Internal IEEE-488 interface
Allows for remote computer control of the amplifier (contact IFI for custom control configurations)
RF sample port
Allows for measurement of the amplified signal at -50 dB through a BNC connection (-56 dB if RF power indication is also installed)
One GHz driver
Replaces the 0.01 to 220 MHz solid state driver amplifier with a 0.01 to 1000 MHz version.
Door interlock
A BNC connection that will automatically shut off the amplifier when triggered (e.g., door open signal)
Pulse power
Can also operate in a pulse mode with up to six times the linear power rating
Superior durability
Completely air cooled
Instantaneous frequency range
Gain control range of greater than 40 dB
Built-in solid state driver amplifier and preamplifier
Unconditionally stable against load mismatches
Auto-limit tube protection circuitry
Expandable